Industrial Titanium Plate And Frame Heat Exchangers

Product Detail

MBR0.4 Plate-type Heat Exchanger




1. Technical Data

Heat exchanging area of one plate :	0.4095 m2
Space between plates:	4.0 mm
Cross­sectional area of one flow passage:	0.001353 m2
Maximum disposal volume:	200 m³/h
Whole length of flange:	125 DN mm
Working temperature:	=150 ?
Working pressure :	0.6,1.0,1.25  Mpa
Diameter of angle holes:	125 mm



Line graph of heat coefficient-speed(water-water)



Graph of pressure decrease -speed





2. MBR0.4Parameter

Outside size of plate(mm)	1220×460×0.6	Normal ripple pitch(mm)	13
Effective heat exchanging   area(m2)	0.4095	Width of flow passage(mm)	410
Weight of one plate(kg)	2.5	Average space between plates(mm)	4
Diameter of angle hole(mm)	?125	Average crossed sectional   area(m2)	0.001353
Height of ripple(mm)	3.3	Average equivalent diameter(mm)	6.6
Form of ripple	Isosceles triangle	Material of plate	304 316 316L Ti




3. Installing Size of MBR0.4

       

                                                     Floor-type           Hanging type




B=460  C=1203  F=176  E=270  H=1340  B1=550  DN=125 PN1.0




Heat exchanging area(m2)	30	35	40	45	50	55	60	65	70
Plate number(sheet)	76	88	101	113	126	138	151	163	176
L (mm)	304	352	404	452	504	552	604	652	704
D (mm)	712	760	812	860	912	960	1012	1060	1112
A1(mm)	484	532	584	632	684	732	784	832	884
Weight (kg)	676	714	755	792	833	870	910	948	989
A2 (mm)	1200			1400			1670




4.Plate material:

1.SUS304 SUS316L

2.Titanium and Palladium

3.Hadtelloy Alloy

4.Nickel

5.Design features

1.High efficiency and low Consumption: Its heat exchanging parameter is 2000-4500kcal/m2.?.h, which is several times higher than of cellpacking heat exchanger.

2.Compact structure: Plate-type heat exchanger is arranged compactly. Compared with other types of heat exchanger, it takes up less area and space. It is only 1/5 the size of line-type heat exchanger, considering the same area.

3.Easy cleaning convenient dismantlement: Set flat and plate are held together by twisting bolts. Therefore it is convenient to dismantle. You can clean it whenever you like.what’s more, it’s not easy to get scale because of its smooth flat surface and high frequent flowing.

4.Long using time: plate-type heat exchanger is made of rustless steel or titanium alloy. It can endure corrosion of different kinds of medium. The rubber pad can be changed freely. It is convenient to dismantle or test.

5.Strong adaptability: The plates are separate units. It can increase or decrease flowing according to requirement. From is varied. It can be used for different technological requirements.

6.No mixed liquid: There is a liquid passage in the sealed groove. Every medium cannot be mixed together. Medium runs out even when there appears leakage.